The tub is out of the mould

So, it’s been a while since I posted, but a lot has been achieved, and there are videos below to share the love. So, the tub has been infused, it’s been extracted, the peel ply and infusion mesh have been dragged off the back (that was a sweaty day), it’s been partially fitted and baked.

I’ve got three videos below to show what happened. There’s the infusion setup, followed by the resin going in, and finally the lovely tub once it’s out.

The infusion setup

The actual Infusion going in

The Tub out of the mould – ta-daaaaa