First 3d printed prototype exhaust pipe

So, I’ve completed the first 3-D printed prototype exhaust pipe. Every straight and bend is taken from an off-the-shelf exhaust part supplied by Alunox. This means if the 3-D printed parts fit then the exhaust as I make it should fit just as well.

2 thoughts on “First 3d printed prototype exhaust pipe

  1. Hi David. I’ve bought the dimensions from SBD and they recommend 4->2->1, so I’m going with that. I’ve been using Onshape. It works brilliantly on my iPad with the pencil. I can’t recommend it enough.

Leave a Reply to FuryRebuild Cancel reply